注册 登录  
 加关注
查看详情
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

银河里的星星

落在人间

 
 
 

日志

 
 

The power of Python's yield(zz)  

2010-10-10 22:11:34|  分类: 程序设计语言 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
(October 2007)  http://users.softlab.ntua.gr/~ttsiod/yield.html
Computing permutations
What is a permutation? Reading from my local copy of Wikipedia:
Permutation is the rearrangement of objects or symbols into distinguishable sequences. Each unique ordering is called a permutation. For example, with the numerals one to six, each possible ordering consists of a complete list of the numerals, without repetitions. There are 720 total permutations of these numerals, one of which is: "4, 5, 6, 1, 2, 3".

How do you go about calculating all possible permutations of a set? Well, if you know a priori the size of the input set, you can just write as many loops as is the set's cardinality. If, for example, we only have to deal with sets of 4 elements, ...


for a in (1,2,3,4): for b in (1,2,3,4): if b == a: continue # No repetitions allowed for c in (1,2,3,4): if c in [a,b]: continue # No repetitions allowed for d in (1,2,3,4): if d in [a,b,c]: continue # No repetitions allowed print values[a], values[b], values[c], values[d]

That's all fine and simple, but what if you don't know in advance how large the set is?
You have to perform the same kind of loops, only you don't know how deep you'll have to go.

"Deep"?

Whenever "deep" comes up, recursion is knocking on the door...


def permute(inputData, outputSoFar): for elem in inputData: if elem not in outputSoFar: outputSoFar.append(elem) if len(outputSoFar) == len(inputData): print outputSoFar else: permute(inputData, outputSoFar) # --- Recursion outputSoFar.pop() permute([1,2,3], [])
This prints:
$ python simple.py   [1, 2, 3]  [1, 3, 2]  [2, 1, 3]  [2, 3, 1]  [3, 1, 2]  [3, 2, 1]  
If you look at the code of permute, you'll again see the core loop iterating over all our input data: for elem in inputData. Since we don't know how deep we'll have to go - that is, how many "sockets" exist that we will have to run this loop for - we will use the same loop for all data "slots", through recursion. In each step of the recursion, we first verify that the data hasn't been used yet (remember, permutations don't have repetitions, and all our inputData are different to one another), then put the element inside outputSoFar, and recurse to proceed with the next available slot. If we run out of available slots, we've just created a complete permutation, so we print outputSoFar.

Clean, simple code. But... It just prints the results. What if we want to take some action on each permutation?

We could of course pass a lambda or a function (for execution on each permutation) as an extra argument to permute... But there is a better, a much better way:


class Permutation: def __init__(self, justalist): self._data = justalist[:] self._sofar = [] def __iter__(self): return self.next() def next(self): for elem in self._data: if elem not in self._sofar: self._sofar.append(elem) if len(self._sofar) == len(self._data): yield self._sofar[:] else: for v in self.next(): yield v self._sofar.pop()
This is the kind of code that makes me love Python. Why? Well...
a = [1,2,3]  for i in Permutation(a):      print i  
Isn't this code the best possible interface for permutation enumeration?

An iterable class was created (it has an __iter__ member) which takes in its constructor the list we're going to permute. The next method returns the data for each iteration. And here's the icing on the cake: the next method is almost identical to our previously created function, only this time it yield's the results, instead of printing them! Using only this change, we create a much clearer, elegant interface for our Permutation class.

In case you haven't met yield before: this requires no extra runtime memory! The iteration process uses the magic behind yield, which "freezes" the state (call stack, IP, etc) when it returns the result, and continues from the exact place it last was, when next is called again.

And you ask why I love Python?

The code above doesn't use any kind of library... It simply uses language features to implement what we need. Now try writing the same functionality in plain C++, without using any library (STL permutations or otherwise) ... See? :-)

Update: For people developing in C/C++, here is an excellent article by Simon Tatham on how he implemented coroutines (i.e. yield-like behaviour) in C.

P.S. Notice that where the original permute function called itself (the recursive call) a slight modification had to be done: by invoking yield, the next member is now a generator function, so we can't just simply call next again - if we did, we would lose the returned generator object, and thus, the returned permutations! We must instead loop over the returned results with a simple for v in self.next(): yield v. This way, the results are properly propagated to the "parent" call.

  评论这张
 
阅读(957)| 评论(0)
推荐 转载

历史上的今天

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2018